The PENGGUNAAN LIMBAH SABUT KELAPA SEBAGAI BAHAN PERKUATAN ALAMI PADA BETON NORMAL
USE OF COCONUT COIR WASTE AS A NATURAL REINFORCEMENT MATERIAL IN NORMAL CONCRETE
DOI:
https://doi.org/10.51988/jtsc.v4i1.122Keywords:
Natural Reinforcement, Coconut Coir, ConcreteAbstract
Until now, the utilization of coconut coir waste in Kolaka Regency, Southeast Sulawesi Province, has not been optimal, especially in the world of construction. This study aims to examine the effect of using coconut coir fiber as a natural reinforcement material in concrete. The research method is using experimental methods carried out in the laboratory. The test sample used with dimensions of 150 mm x 300 mm. There were 2 (two) types of samples used, namely normal concrete samples and concrete samples with coconut fiber reinforcement with a total sample of 30 pieces with a concrete design age of 7 days, 14 days and 28 days. After drying, 15 samples were coated with coconut fiber waste using adhesive glue, the remaining 15 samples were not given reinforcement. The results of this study obtained the compressive strength test data for normal concrete aged 7 days of 13.46 MPa and concrete with reinforcement of 11.26 MPa. At the age of 14 days the compressive strength of normal concrete is 17.55 MPa and reinforced concrete is 20.51 MPa. And, for normal concrete age of 28 days it is 22.59 MPa and concrete with reinforcement is 25.80 MPa. The conclusion of this study is that there is an increase in compressive strength for concrete with reinforcement against normal concrete from a design compressive strength of 22.5 MPa, which is 14.67%.
Keyword: Natural Reinforcement, Coconut Coir, Concrete
References
Dipohusodo, I. 1993. Struktur Beton Bertulang. Jakarta: PT. Gramedia Pustaka.
Elhusna, & Suwandi, J. (2012). Peningkatan Kuat Tarik Beton Akibat Penambahan Serat Sabut Kelapa. Jurnal Inersia, 4(1), 17-23.
Khoeri, H. (2020). Pemilihan Metode Perbaikan dan Perkuatan Struktur Akibat Gempa (Studi Kasus Pada Bank Sulteng Palu. Jurnal konstruksi, 12(1), 93-104.
Kristianto, A., Pranata, Y. A., & Imran, I. (2017). Studi Eksperimental Penggunaan Pen-binder dan FRP Sebagai Perkuatan Tulangan Tidak Standar Pada Kolom Lingkaran. Jurnal Teknik Sipil ITB, 24(1), 51-59. doi:10.5614/jts.2017.24.1.7
Marfranklin, M., & Risdianto, Y. (2019). Pengaruh Penambahan Serat Sabut Kelapa Pada Pembuatan Beton Ringan Cellular Lightweight Concrete. Jurnal Rekayasa Teknik Sipil, 2(1), 13-20.
Mulyono, T. 2003. Teknologi Beton. Yogyakarta: CV. Andi Offset.
Nugraha, A.P. 2007. Teknologi Beton. Yogtakarta: CV. Andi Ofset
Sahrudin, & Nadia. (2016). Pengaruh Penambahan Serat Sabut Kelapa Terhadap Kuat Tekan Beton. Jurnal Konstruksia, 7(2), 13-20.
SNI 03-2834-2000. (2000). Tata Cara Pembuatan Rencana Campuran Beton Normal.
SNI 03-1974-1990. (1990). Metode Pengujian Kuat Tekan Beton.
Tjokrodimuljo, K. 2007. Teknologi Beton. Biro Penerbit Jurusan Teknik Sipil Fakultas Teknik UGM. Sleman, DI. Yogyakarta.
Tjokrodimuljo, K. 1992. Teknologi Beton. Biro Penerbit Jurusan Teknik Sipil Fakultas Teknik UGM. Sleman, DI. Yogyakarta.
Janizar, S., Setiawan, F., & Saputra, D. H. (2020). AUDIT STRUKTUR GEDUNG BANK X KOTA BANJARMASIN. JURNAL TEKNIK SIPIL CENDEKIA (JTSC), 1(1), 15-26.
Hafudiansyah, E., & Anisarida, A. A. (2021). ANALISIS STRUKTUR MOORING DOLPHIN KAPASITAS KAPAL 2000 GT (STUDI KASUS PELABUHAN MUNSE SULAWESI TENGGARA). JURNAL TEKNIK SIPIL CENDEKIA (JTSC), 2(1), 69-83.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Jurnal Teknik Sipil Cendekia (JTSC)

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.











