UJI KELAYAKAN KONSTRUKSI BALOK PT DAEYUNG DARI APLIKASI SAP2000 MENGGUNAKAN MACHINE LEARNING DENGAN MODEL LINIER REGRESSION
DOI:
https://doi.org/10.51988/jtsc.v5i1.185Keywords:
Feasibility test, Beam Construction, Machine LearningAbstract
Structural design is one of the important elements in the construction of a building in order to produce a safe, strong and economical building. Especially in the design of upper structures (in the form of floors, beams, columns, walls and roofs). In beam structures, design and feasibility testing regarding dimensions and the use of reinforcement are safe and economical. Based on the allowable normal stress, it can be seen whether the normal stress is feasible or not if a certain input value is entered, so that information on the feasibility of this quantity can be applied directly to the building. Therefore, it is necessary to have a simulation process regarding the feasibility of stress so that the building to be created can meet the criteria for being a safe, strong and economical building. Overall the analysis process uses Machine Learning methods. By using three types of data, namely algorithm training data, validation data and testing data with a comparison percentage of training and testing data of 80%:20%. The training process produces very high accuracy. This can be seen in the R-Squared value of 0.99 while the RMSE is 1.30e-06. Meanwhile, in the data testing process, high accuracy was also obtained, for R-Squared of 1.0 and RMSE 3.87e-16. After the training and testing process has obtained very good results, we proceed to the beam feasibility testing process by entering certain input values, to produce the normal stress magnitude (Mpa) along with the confidence level of each normal stress prediction result.
References
Abdu, A. Mengenal Articial Intelligence, Machine Learning,Neural Network, dan Deep Learning, Yayasan Teknologi Indonesia , diakses daring pada http://www.teknoindonesia.com, 2017.
Akhmad, R., et al. (2015). Peningkatan Kemampuan Pemecahan Masalah Matematis Siswa Kelas Vi Sd Pada Materi Volume Kubus Dan Balok Menggunakan Alat Peraga Vokuba. Jurnal Pelangi, Vol. 8, No. 1, pp. 24-33, DOI: http://dx.doi.org/10.22202/jp.2015.v8i1.337.
Ari W. (2023). Prediksi Kekuatan Gempa Menggunakan Machine Learning Dengan Model Xgboost Sebagai Langkah Strategis dalam Perencanaan Struktur Bangunan Tahan Gempa Di Indonesia. MESA (Teknik Mesin, Teknik Elektro, Teknik Sipil, Arsitektur), 6(1), 18–29. Retrieved from https://ejournal.unsub.ac.id/index.php/FTK/article/view/1829.
Azwina, R. (2023). Strategi Industri Manufaktur Dalam Meningkatkan Percepatan Pertumbuhan Ekonomi Di Indonesia. Profit: Jurnal Manajemen, Bisnis dan Akuntansi. Vol. 2, No. 1, pp. 44-55, Februari 2023.
Faisal, R., et al. (2018). Analisis Struktur Ruang Rawat Inap Kelas Iii Prabu Siliwangi Rsud Gunung Jati Kota Cirebon. Jurnal Konstruksi UNSWAGATI CIREBON, Vol. 7, No. 2, pp. 119-132, Januari 2018.
Indra A., et al. (2023). Analisis Elemen Struktur Balok Dan Kolom Beton Bertulang (Studi Kasus Gedung Dealer Honda Astra Kota Samarinda. JTS:Jurnal Teknologi Sipil, Vol. 7, No. 1, pp. 29-38, DOI: http://dx.doi.org/10.30872/ts.v7i1.
Inkiwirang E.,C., et al. (2018). Metode Pelaksanaan Pekerjaan Konstruksi Dalam Proyek Pembangunan Sekolah SMK Santa Fimilia Kota Tomohon. Jurnal Sipil Statik, Vol. 6, No. 11, pp. 927-940, November 2018.
Irfano, L.M., et al. (2020). Pengendalian Biaya Dengan Metode Analisis Indeks Pada Proyek Office And Distribution Center Airmadidi, Minahasa Utara. TEKNO, Vol. 17, No. 74, pp. 10-19, April 2020.
Kurniawan, F., et al. (2020). Struktur balok adalah salah satu elemen konstruksi yang umum digunakan dalam berbagai jenis bangunan. Seperti gedung, jembatan, rumah, dan infrastruktur lainnya. Jurnal Sipil Statik, Vol. 8, No. 4, pp. 483-494, Juli 2020.
L. Jäntschi, L. L. Pruteanu, A. C. Cozma and S. D. Bolboac , Inside of the linear relation between dependent and independent variables, Computational and mathematical methods in medicine, Vol 1, pp: 1-11, DOI:10.1155/2015/360752, 2015.
Peraturan menteri pekerjaan umum nomor : 29/prt/m/2006 tentang pedoman persyaratan teknis bangunan gedung.
Suyanto. (2018). Machine Learning Tingkat Dasar dan Lanjut. Informatika, Bandung.
Regina, D.S., et al. (2017). Perbandingan Kuat Tarik Lentur Beton Bertulang Balok Utuh Dengan Balok Yang Diperkuat Menggunakan Chemical Anchor. Jurnal Sipil Statik, Vol.5, No. 7, pp. 393-399. September 2017.
Setiadi, E., dan Wibowo, A. 2023. ‘Klasifikasi dan Deteksi Keretakan pada Trotoar Menggunakan Metode Convolutional Neural Network’, JTSC, Vol. 4, No. 1, pp 412-427, Februari 2023, DOI:https://doi.org/10.51988/jtsc.v4i1.116.
X. Su, X. Yan, and C. L. Tsai, Linear regression, Wiley Interdisciplinary Reviews: Computational Statistics, 4(3), 275-294, 2012
Yulianto, Y. & Wibowo, A. 2023. Deteksi keretakan perkerasan jalan aspal menggunakan metode convolutional neural network. JTSC, Vol. 4, No. 2, 581-593, DOI: https://doi.org/10.51988/jtsc.v4i2.
Zerizkyeska, N., et al. (2021). Manajemen Perawatan dan Pemeliharaan Gedung, Aset dan Fasilitas di Universitas Palangkaraya. Jurnal KACAPURI, Vol. 4, No. 2, Desember 2021.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Ari Wibowo, Endang
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.