PERBANDINGAN NILAI KARAKTERISTIK MARSHALL UNTUK CAMPURAN AC-WC MENGGUNAKAN QUARRY AKANUNU DAN QUARRY HERA

Authors

  • Krisantos Bela Universitas Katolik Widya Mandira Kupang

DOI:

https://doi.org/10.51988/jtsc.v5i2.201

Keywords:

Marshall Characteristics, AC-WC, Quarry Akanunu, Quarry Hera

Abstract

Asphalt Concrete - Wearing Course (AC-WC) is a road construction layer consisting of coarse aggregate, fine aggregate, filler, and hard asphalt. This material is mixed, laid, and compacted at specific temperatures to form a durable and strong road surface layer. Enhancing road resilience against various factors causing damage is essential to maintain transportation systems and ensure even economic growth across regions. In this context, it's important to compare the physical and mechanical characteristics of AC-WC mixtures using materials from Quarry Akanunu and Quarry Hera. The aim of this study is to assess the performance of AC-WC mixtures from both quarries using the standard Marshall 2 x 75 blows testing method. The research findings indicate that using an optimal asphalt content of 5.85% from Quarry Akanunu, there are differences in Marshall characteristics compared to mixtures using materials from Quarry Hera. At an asphalt content of 5.85% from Quarry Akanunu, the differences in stability values reached 67.28 kg, flow 0.13 mm, VIM (Void in the Mix) 0.31%, VMA (Void in Mineral Aggregate) 0.14%, VFB (Void Filled with Bitumen) 1.22%, and Marshall Quotient (MQ) 31.43 Kg/mm. Meanwhile, using an optimal asphalt content of 5.90% from Quarry Hera, the differences in stability values reached 69.90 kg, flow 0.15 mm, VIM 0.31%, VMA 0.14%, VFA 1.22%, and MQ 33.12 Kg/mm. From this analysis, Quarry Hera shows slightly better performance in terms of stability and other Marshall characteristics compared to Quarry Akanunu, although both mixtures meet the specifications of Bina Marga 2018 revision 2.

References

Badan Standart Nasional. (1990). SNI 03-1968-1990 Metode Pengujian Tentang Analisis Saringan Agregat Halus dan Kasar. Jakarta: Badan Standarisasi Nasional.

Badan Standart Nasional. (1990). SNI 03-1969-1990 Metode Pengujian Tentang Berat Jenis dan Penyerapan Air. Jakarta: Badan Standarisasi Nasional.

Badan Standart Nasional. (1990). SNI 03-1970-1990 Metode Pengujian Tentang Berat Jenis dan Penyerapan Air Agregat Halus. Jakarta: Badan Standarisasi Nasional.

Badan Standart Nasional. (1991). SNI 03-2417-1991 Metode Pengujian Keausan Agregat dengan Mesin Abrasi Los Angeles. Jakarta: Badan Standarisasi Nasional.

Badan Standart Nasional. (1991). SNI 15-2531-1991 Metode Pengujian Berat Jenis Semen Portland. Jakarta: Badan Standardisasi Nasional.

Dewi, S. H., Mildawati, R., & Nurhakim, A. (2021). Perbandingan Dua Jenis Agregat Daerah Yang Berbeda Terhadap Karakteristik Marshall Pada Aspal Porus. SAINSTEK, 9(1), 47–54.

Direktorat Jenderal Bina Marga, 2018. "Spesifikasi Umum 2018 Untuk Pekerjaan Konstruksi Jalan Dan Jembatan Revisi 2", Jakarta.

Fatmawati, L. (2013). Karakteristik Marshall Dalam Aspal Campuran Panas AC-WC Terhadap Variasi Temperatur Perendaman. Wahana Teknik Sipil: Jurnal Pengembangan Teknik Sipil, 18(2).

Standart Nasional Indonesia. (2003). RSNI M-01-2003, Metode Pengujian Campuran Beraspal Panas dengan Alat Marshall. Badan Standarisasi Nasional, Jakarta.

Iriyena, P., Naukoko, A. T., & Siwu, H. F. D. J. (2019). Analisis pengaruh infrastruktur jalan terhadap pertumbuhan ekonomi di kabupaten kaimana 2007-2017. Jurnal Berkala Ilmiah Efisiensi, 19(02).

Irianto, I., Nur, K., Mahyuddin, M., Erniati, B., Miswar, T., Ihsan, M., ... & Syukuriah, S. (2021). Perancangan Perkerasan Jalan.

Khamid, A., & Izazi, M. A. (2019). Pengaruh Genangan Air Hujan terhadap Kinerja Campuran Aspal Concere-Wearing Course (AC-WC). Syntax Lit. J. Ilm. Indones, 4(7), 1–14.

lopes Da Cruz, T. A., & Sakti, W. I. (2018). IDENTIFIKASI FAKTOR PRIORITAS MOTIVASI DAN PRESTASI TENAGA KERJA KONSTRUKSI DALAM MENGOPTIMALKAN PENGGUNAAN TENAGA KERJA LOKAL DI TIMOR LESTE. Jurnal Muara Sains, Teknologi, Kedokteran Dan Ilmu Kesehatan, 2(2), 372–383.

Makin, M. L. A. M., Kalogo, E., & Bela, K. R. (2023). PENGARUH VARIASI JUMLAH TUMBUKAN TERHADAP NILAI MARSHALL HASIL PEMADATAN PADA ASPAL HRS-WC SECARA MANUAL DAN ELEKTRIK. Eternitas: Jurnal Teknik Sipil, 2(2), 27–37.

Setiawan, F., & Janizar, S. (2021). Percepatan Jadwal Konstruksi dan Pengaruhnya Terhadap Biaya Penyelesaian Proyek Konstruksi. Jurnal Teknik Sipil Cendekia (Jtsc), 2(1), 90-126

Janizar, S. (2023). Penerapan Metode Earned Value Analysis Terhadap Waktu

Penjadwalan. Jurnal Konstruksi, 21(1), 113-120

Downloads

Published

2024-07-26

Issue

Section

Articles