Implementasi BIM (Building Information Modeling) Terhadap Peningkatan Akurasi pada Perhitungan Estimasi Biaya Proyek Pembangunan Jalan Jalur Lintas Selatan (Jls) Lot 3 Pantai Serang – Sumbersih
DOI:
https://doi.org/10.51988/jtsc.v6i2.323Keywords:
Building Information Modeling, Quantity Take Off, Revit, Cost Estimation, Road ConstructionAbstract
The development of technology has significantly influenced the construction industry, introducing innovations that enhance project execution efficiency and accuracy. One of the notable advancements is Building Information Modeling (BIM) is a digital representation of a building that fully illustrates its form, size, and functional aspectsThis study aims to implement Building Information Modeling (BIM) for Quantity Take Off (QTO) using Autodesk Revit 2025 and compare its results with conventional methods in terms of volume and cost estimation accuracy. The research object is the South Cross Road Construction Project (JLS) Lot 3 from Pantai Serang to Sumbersih. This comparative quantitative study utilizes Detail Engineering Design (DED) documents and 3D modeling with Autodesk Revit 2025. The findings show that BIM-based QTO produces more accurate and efficient cost estimations, especially in complex calculations such as cut and fill operations. The BIM method resulted in a total project cost that was 13.73% higher than the conventional method, primarily due to more precise terrain modeling. This research is expected to be a reference for improving the accuracy of infrastructure project cost estimation.
References
Adekunle, S., Aigbavboa, C., & Ejohwomu, O. (2022). SCAN TO BIM: a systematic literature review network analysis. IOP conference series: Materials science and engineering, https://doi.org/https://10.1088/1757-899X/1218/1/012057
Alshabab, M. S., Vysotskiy, A., Khalil, T., & Petrochenko, M. (2017). BIM-based quantity takeoff. Stroitel'stvo Unikal'nyh Zdanij i Sooruzenij(4), 124. https://doi.org/https://10.18720/CUBS.55.8
Aprillia, E., & Putra, I. N. D. P. (2024). The Implementation of BIM Tekla Structure on Quantity Take Off for Structural Works of X Building Project. Jurnal Teknik Sipil, 17(1), 13-22. https://doi.org/https://doi.org/10.56444/jts.v17i1.1567
Asmarayani, D. V., & Kresnanto, N. C. (2022). Penilaian efektivitas implementasi building information modelling (BIM) pada proyek konstruksi bangunan gedung. Jurnal Teknik Sipil, 16(4), 247-260. https://doi.org/https://doi.org/10.24002/jts.v16i4.5539
Fitriani, H., Budiarto, A., Ajayi, S., & Idris, Y. (2019). Implementing BIM in architecture, engineering and construction companies: Perceived benefits and barriers among local contractors in Palembang, Indonesia. International Journal of Construction SupplyChainManagement,9(1),20-34. https://doi.org/https://10.14424/ijcscm901019-20-34
Khosakitchalert, C., Yabuki, N., & Fukuda, T. (2019). Improving the accuracy of BIM-based quantity takeoff for compound elements. Automation in Construction, 106, 102891. https://doi.org/https://doi.org/10.1016/j.autcon.2019.102891
Latiffi, A. A., Sulum, M. N. S., & Bilal, K. (2020). Eksplorasi Pemodelan Informasi Bangunan atau Building Information Modelling (BIM) Dalam Penyelenggaraan Bangunan. Research in Management of Technology and Business, 1(1), 575-587. https://doi.org/https://doi.org/10.30880/rmtb.2020.01.01.044
Magfirona, A., Amar, T. I. b. K., & Failasufa, A. A. M. H. (2023). Analisis Komparasi Quantity Take Off Pekerjaan Struktur Berdasarkan Metode Konvensional Dan Metode BIM Studi Kasus: Perencanaan Omah DW. Jurnal TESLINK: Teknik Sipil dan Lingkungan, 5(2), 61-67. https://doi.org/https://doi.org/10.52005/teslink.v5i2.272
Manzoor, B., Othman, I., Kang, J. M., & Geem, Z. W. (2021). Influence of building information modeling (Bim) implementation in high-rise buildings towards sustainability. Applied Sciences, 11(16), 7626. https://doi.org/ https://doi.org/10.3390/app11167626
Milyutina, M. (2018). Introduction of building information modeling (bim) technologies in construction. Journal of Physics: Conference Series,https://doi.org/https://10.1088/1742-6596/1015/4/042038
Mohammad, W. W., Abdullah, M. R., Ismail, S., & Takim, R. (2018). Overview of Building Information Modelling (BIM) adoption factors for construction organisations. IOP Conference Series: Earth and Environmental Science, https://doi.org/10.1088/1755-1315/140/1/012107
Pratama, R. E., Hendriyani, I., & Pratiwi, R. (2024). Implementasi Konsep Building Information Modelling (Bim) 5d Pada Pekerjaan Struktur Untuk Efisiensi Biaya Proyek. JTT (Jurnal Teknologi Terpadu), 12(2), 138-143. https://doi.org/https://doi.org/10.32487/jtt.v12i2.2219
Pratema, A., & Marzuki, P. F. (2023). Kajian Implementasi BIM (Building Information Modeling) di Indonesia Berdasarkan Perspektif Pelaksana Konstruksi (Studi Kasus: Proyek Kontraktor BUMN). J. Tek. Sipil, 30(02), 15. https://doi.org/https://10.5614/jts.2023.30.2.16
Saputro, D. N., Dilaga, S. J., Hermanto, N. I. S., & Susanto, H. (2024). Implementasi Metode Building Information Modeling (Bim) Pada Tahap Mutual Check-100 (Mc-100) Pada Pekerjaan Struktur. Jurnal Arsip Rekayasa Sipil dan Perencanaan, 7(1). https://doi.org/https://doi.org/10.24815/jarsp.v7i1.33075
Setiyono, T. R. (2024). Integrasi Building Information Modeling (BIM) terhadap Kesiapan Lulusan Teknik Sipil Menghadapi Transformasi Digital di Industri Konstruksi. https://doi.org/https://10.58737/jpled.v4i4.36
Telaga, A. S. (2018). A review of BIM (Building Information Modeling) implementation in Indonesia construction industry. IOP Conference Series: Materials Science and Engineering, https://doi.org/10.1088/1757-899X/352/1/012030
Wahyuningrum, C. A., Sari, Y. C., & Kresnanto, N. C. (2020). Building Information Modeling (BIM) for dams-literature review and future needs. Journal of Civil Engineering Forum, https://DOI10.22146/jcef.51519
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Sipil Cendekia (JTSC)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
